CS4364-CQZR【PDF 32/50 页】IC DAC 103DB 24BIT 6CH 48-LQFP

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录1991

28页 29页 30页 31页 [32页]33页 34页 35页 36页

DS619F1

CS4364

Function:

The AOUTAx and AOUTBx volume levels are independently controlled by the A and the B Channel Vol-

ume Control Bytes when this function is disabled. The volume on both AOUTAx and AOUTBx are deter-

mined by the A Channel Attenuation and Volume Control Bytes (per A-B pair), and the B Channel Bytes

are ignored when this function is enabled.

6.7.3

Single Volume Control (SNGLVOL)

Default = 0

0 - Disabled

1 - Enabled

Function:

The individual channel volume levels are independently controlled by their respective Volume Control

Bytes when this function is disabled. The volume on all channels is determined by the A1 Channel Volume

Control Byte, and the other Volume Control Bytes are ignored when this function is enabled.

6.8

Ramp and Mute (Address 08h)

6.8.1

Soft Ramp and Zero Cross Control (SZC)

Default = 10

00 - Immediate Change

01 - Zero Cross

10 - Soft Ramp

11 - Soft Ramp on Zero Crossings

Function:

Immediate Change

When Immediate Change is selected all level changes will take effect immediately in one step.

Zero Cross

Zero Cross Enable dictates that signal level changes, either by attenuation changes or muting, will occur

on a signal zero crossing to minimize audible artifacts. The requested level change will occur after a time-

out period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz sample rate) if the signal

does not encounter a zero crossing. The zero cross function is independently monitored and implemented

for each channel.

Soft Ramp

Soft Ramp allows level changes, both muting and attenuation, to be implemented by incrementally ramp-

ing, in 1/8 dB steps, from the current level to the new level at a rate of 1 dB per 8 left/right clock periods.

Soft Ramp on Zero Crossing

Soft Ramp and Zero Cross Enable dictates that signal level changes, either by attenuation changes or

muting, will occur in 1/8 dB steps and be implemented on a signal zero crossing. The 1/8 dB level change

will occur after a time-out period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz

543

SZC1

SZC0

RMP_UP

RMP_DN

PAMUTE

DAMUTE

MUTE_P1

MUTE_P0

111

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式